Showing posts with label Volt. Show all posts
Showing posts with label Volt. Show all posts

Monday, April 7, 2014

11 Time Champions


This weekend we competed at the EV Challenge at NCCAR in Garysburg, NC.  We are pleased to announce some excellent results.  Without further ado:
 
Team results:
1st Place Overall, Car Class
1st Place Overall, Truck Class
1st Place Overall, STEM Cycle
1st Place School Initiative
2nd Place, Vehicle Design, Truck Class
2nd Place, Vehicle Design, STEM Cycle

Individual (or partner) events:
1st place, Troubleshooting: Ryan Latronico and Justin Poplaski
1st place, Oratorical: Katiana Vazquez and Tyler King
1st Place, Range (Car): Zac Bender and Justin Poplaski
1st Place, Jeopardy, Ben Nazelrod and Justin Poplaski
1st Place, Range (Truck): Grant Simme and Weston Hicks
1st Place, Autocross (Truck): Ben Nazelrod
1st Place, Acceleration (STEM Cycle): Brandon Whaley
1st Place, Range (STEM Cycle): Brandon Whaley
1st Place, Autocross (STEM Cycle): Roberto Gonzalez
2nd Place, Autocross (Car): Ryan Latronico  (A very consistent and fast performance!)
2nd Place, Acceleration (Truck): Logan Moore
2nd Place, Troubleshooting: Weston Hicks and Domenick DiBiase
3rd Place, Acceleration (Car): Katiana Vazquez
3rd Place, Jeopardy: Logan Moore and Tyler King
3rd Place, Oratorical: Grant Simme and Zac Bender
 
Our small-scale STEM Cycle was completed just in time to compete!

Saturday, May 4, 2013

Introducing the Voltswagen!!

We are proud to announce the completion of our latest vehicle, a 1961 VW Bug, the Voltswagen, just in time for Mr. Garrett's 50th birthday!  The car belongs to Mr. Garrett, our former instructor, who was just named Executive Director of the EV Challenge.  In addition to everyday use, he will use this vehicle as a tool for recruiting new schools to participate in the EV Challenge. 
Some students stayed late into the night to get it finished!
The front battery box; charger is underneath.


The rear battery box, on the package shelf.

Plugged in and charging!

She's ready to go!

The Motor, controller and DC/DC converter.

Details of the car are as follows:

44 100 Ah Thundersky Cells
Lithiumate Lite BMS
Elcon PFC 1500 Charger
DCP Raptor 1200A Controller
ADC 9" Motor
Battery heaters
Range:  75 miles projected
Top Speed: Faster than stock
Acceleration: MUCH faster than stock


Saturday, November 24, 2012

Raffle Ticket sales at Advance Auto


Cold day at Advance Auto today, but a few of the THS EV Team showed up bright and early at 8:00 to display the vehicles and sell raffle tickets.  We sold a total of 32 tickets  in a short period of time.  Next week, we will be at the Hampstead Community Center at the annual Hampstead Women's Club Holiday Craft Fair from 8:00-1:00.

Friday, October 12, 2012

WECT TV 6 News report



Bailey Hicks from Wilmington local channel WECT TV6 came early this morning to do a feature story on our EV program.  She was very impressed with the class and their knowledge of the vehicles.  She was especially impressed by the fact that the EV13 Team attends the class every day at 7:15, an hour before regular school begins.  We were able to give a few interviews and explain how we were preparing for the NEAT competition next week.  Davis Sessions and Matt van der Wal did an excellent job in front of the camera.  Bailey was very interested in the performance of the vehicles, so we did not hesitate to take her for a spin in the MR2.  As you can tell by the picture above, she definitely has an "EV Grin"!

There will be an update after the segment airs that will link to the story online.  Stay tuned.

Thursday, October 11, 2012

CFCC Auto Body demonstration


We had a guest speaker today from the CFCC Paint and Auto Body program.  Aimee Abreya stopped in to speak about and promote her program at CFCC for high school students who would like the opportunity to take the classes while still in high school for dual enrollment.  She also brought a very expensive paint booth simulator to allow students to practice painting in a virtual world!  The simulator was an awesome experience for several students who braved the virtual helmet and tried their skills at painting virtual body panels.  Every experience like this is a great opportunity for students to see what is available as a career.  We always need a vehicle painted when we do a conversion, so this would really help us out as well.

Monday, October 8, 2012

Display at Wilmington Christian Academy

We have a unique opportunity to be a mentor to a new EV Club being created at Wilmington Christian Academy.  The instructor visited our class for about two hours this week to get a better picture of what is involved in supporting an Electric Vehicle conversion club.  We had gobs of information and were able to show our shop and classroom area, plus we had advice on when to hold the meetings as well. 
  We were then invited to help promote their program at the school during their Fall Carnival fundraiser.  We drove both vehicles into Wilmington to their site and set up for display.  Most everyone was very impressed by the Topsail EV Team and their knowledge of the vehicles.  Hopefully the WCA club will make it to the EV Challenge final event this year with a newly converted car.

Thursday, September 20, 2012

Atlantic Tool & Die Open House



We had the opportunity to display our vehicles at one of our largest and supportive sponsors, Atlantic Tool & Die yesterday.  The event was their annual open house, held at the facility on Hwy 210 in Hampstead.  Company president  Hugh Highsmith presented the Topsail EV class with a sponsor donation check of $1000!!!  Wow, we really needed that to help us reach our $10,000 fundraising goal this year.  There were more than 50 people there for demonstrations and of course food.  The class was able to tour the maching manufacturing facility and gain valuable insight into the world of machining and the equipment used to produce very precise parts.  Thank you Atlantic Tool & Die for helping our program continue to excel.

Wednesday, March 28, 2012

BMS Wiring aplenty

We are trudging our way through the BMS wiring as you can see.  There are many wires that need to be terminated correctly and hidden as well as possible, since we always believe half the battle is aesthetics.  The cell level terminations are coming along nicely, but the wiring harness wiring is another story altogether.  We found that the wiring had been done "backwards" from the diagram, if that was not bad enough, during testing of the harnesses, a ground lead accidentally touched a high voltage lead causing quite a spark, so we are getting a new set of harnesses and connectors.  Lessons learned!

Thursday, March 8, 2012

The BMS wiring has begun!



Well, it is finally time to begin the daunting task of wiring the Orion BMS in the MR2.  We took a while to figure out exactly how the wiring would have to be done including the routing of the wires from each cell back to the BMS.  Thanks to the excellent customer support of Andrew at Orion, he approved our wiring diagram, and away we went.
    The first hurdle was that the front battery box would have to be wired prior to installing into the car.  To accomplish this, we had to pre-wire it with a separate harness that could be plugged up when the box was back in the car.  In the pictures, you can see the students crimping each connector for the primary harness.  We are almost ready to wire the BMS harnesses.  What is really nice about this experience is how the students have stepped up to learn about the system and how the wiring process should be staged for completion.  After the wiring is complete, we will have a chance to test the harnesses prior to plugging them into the BMS.  Stay in tune, there is more to come!

Tuesday, January 10, 2012

Our BMS has arrived!

Our BMS arrived last Friday and needless to say, we are overwhelmed.  The MR2 has to be totally rewired top to bottom to accomodate the new component.  The BMS will monitor all cells during charge and under driving conditions, giving us real time analysis of the Lithium batteries.  This technology will help preserve the lifespan batteries and help to keep them a balanced set.  The performance of the MR2 should be more consistent and we will have the opportunity to data  log our charge and discharge cycles.  Two students are working on a program that will create an interface that incorporates both the Synkromotive controller and the BMS parameters on the same in dash display.
  Today, we began removing all of the Thundersky batteries so we can top balance the entire set in parallel.  By doing this, we will have a balanced pack, and the BMS will have an easier job for the initial few charge cycles.

Monday, November 7, 2011

NEAT EV Rally results



The Topsail Electric Vehicle Team travelled to the 17th annual NEAT EV Rally in Northampton County this past weekend at the NCCAR facility. The students competed in seven events and tied for first place overall in the competition. The team had many compliments for their attitude and work ethic. They represented Topsail High and Pender County with class and dignity...as always. One instructor even wanted to take Ryan Mowrey back with him to show his students how to act!  The weather cooperated for the most part, and the vehicles performed very well.  Our truck, nursing a battery with a bad cell was only able to manage 12 laps of the NCCAR 2 mile track.  The Toyota MR2 drove 56 miles in the range and could have travelled another 25 miles but had won the event.  The lithium batteries make a huge difference in the range and performance of the car. 
  We would like to congratulate the NEAT team for their results and thank them and their instructor Thomas Pope, along with Harold Miller, for putting on a fine event.  We look forward to next year!  We will practice the pit crew before the event this time.

The results were as follows:
First overall
Acceleration: First Ranger
Acceleration: First MR2
Range: Second Ranger
Range: First MR2
Design: First MR2
Autocross: First Ranger
Autocross: First MR2
Jeopardy competition: Second

Thursday, October 6, 2011

Removing Warp 9 motor for repair


Wouldn't you know it, our MR2 motor has developed a very rare problem.  The balancing putty has broken off the armature and in turn has created a bad vibration within the motor.  Supposedly, this only happens if the motor has turned over 9000 RPM's.  Not likely this has happened, but nonetheless, NetGain is repairing the motor for free.  This week, we removed the motor in the MR2 and shipped it off to Warfield Electric for repair.  Of course, we have a competition November 3rd, so hopefully we will have the motor back in time to install before then.

Friday, July 22, 2011

PLUG IN 2011




Wow, what a week!  We had the awesome opportunity of representing the EV Challenge at the  Plug In 2011 Expo this week in Raleigh.  Not only were we able to gain experience about emerging EV technologies, we also were thrust into the spotlight as hundreds of vendors and guests viewed our MR2 and asked questions about our program.  Wonderful exposure!
   Three Topsail students, Stephen Henderson, Shelby Sessions and Ryan Berkey were on hand to field even the most difficult questions about the EV Challenge program and the MR2 conversion.  Most notable was the typical reaction of "A High School did this?".  Yes, it is out...High School students are capable of great things if given the proper education and motivation.  Nothing like being able to convert and drive an electric vehicle to stoke the fires of creativity and passion!
  Being the only non factory manufactured Electric or Hybrid vehicle at the show, the Topsail High MR2 seemed to stick out among the likes of the Volt, Leaf, ImEV, Focus and Prius.  With the newly installed Lithium Ion battery pack, the MR2 can achieve close to 100 miles on a charge, a fact that was not lost on the onlookers as they marveled at the creativity and overall workmanship of the High School project.